全三维电离粒子有源像素探测器优化仿真

提出了一种双外延高能离子注入的单片集成有源像素探测器的传感器结构,以提升传感器对电荷的收集性能和辐射加固,并进行了三维工艺模拟和物理级器件仿真计算.研究结果表明,所提出的传感器结构改善了内部电场和电势的分布,且目标电极的电荷收集效率提高70%,电荷收集时间减少64%.此外,当等效中子辐射流通量在1012—1015cm-2范围内时,所提出的传感器结构比标准传感器结构有更高的电荷收集能力.     

集体噪声信道上带身份认证的无信息泄露的量子对话协议

在集体噪声条件下提出三个带身份认证的量子对话协议,两个量子对话协议分别用于抵抗集体消相干噪声和集体旋转噪声,另一个用于同时抵抗这两种集体噪声.通信双方通过广义幺正变换将自己的秘密信息编码到量子态中;并根据自己的秘密信息和携带秘密信息的粒子的初末两量子态,便可推知对方的秘密信息实现量子对话.协议的效率、安全性和无信息泄露等性能分析表明了协议的有效性.     

线形离子阱囚禁199Hg＋实验的光学系统设计

利用Zemax软件为线形离子阱囚禁199 Hg＋实验设计了一套光学系统,该系统包括两部分,即光学激发系统和荧光收集系统。光学激发系统由202 H g无极谱灯和激发透镜组组成。激发透镜组将202 Hg无极谱灯的直径为15 mm的圆形面光源整形成23 mm ×4 mm的矩形光去激发199 H g＋能级跃迁,从而使其辐射出荧光,再利用荧光收集系统去收集该荧光。荧光收集系统由收集透镜组、滤波片和光电倍增管组成。设计结果表明：该收集透镜组可以很好地将荧光发光面成像在直径为23 m m的光电倍增管上,具有较高的荧光收集效率,约3％。经物理系统实验,结果表明,该光学系统满足实验要求且具有较高的信噪比,其值约为20。这为高性能线形199 H g＋微波频标的工程应用提供了基础。     

A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate

This paper investigates the plane problem of a frictional receding contact formed between an elastic functionally graded layer and a homogeneous half space, when they are pressed against each other. The graded layer is assumed to be an isotropic nonhomogeneous medium with an exponentially varying shear modulus and a constant Poisson’s ratio. A segment of the top surface of the graded layer is subject to both normal and tangential traction while rest of the surface is devoid of traction. The entire contact zone thus formed between the layer and the homogeneous medium can transmit both normal and tangential traction. It is assumed that the contact region is under sliding contact conditions with the Coulomb’s law used to relate the tangential traction to the normal component. Employing Fourier integral transforms and applying the necessary boundary conditions, the plane elasticity equations are reduced to a singular integral equation in which the unknowns are the contact pressure and the receding contact lengths. Ensuring mechanical equilibrium is an indispensable requirement warranted by the physics of the problem and therefore the global force and moment equilibrium conditions for the layer are supplemented to solve the problem. The Gauss–Chebyshev quadrature-collocation method is adopted to convert the singular integral equation to a set of overdetermined algebraic equations. This system is solved using a least squares method coupled with a novel iterative procedure to ensure that the force and moment equilibrium conditions are satisfied simultaneously. The main objective of this paper is to study the effect of friction coefficient and nonhomogeneity factor on the contact pressure distribution and the size of the contact region.     

GAS WAVE IN FUNCTIONALLY GRADED MAGNETO-ELECTRO-ELASTIC COUPLED STRUCTURE

研究了由均匀磁电弹半空间和功能梯度磁电弹层组成的耦合结构中间隙波的传播特性.假定功能梯度层的材料性能沿厚度方向呈指数变化,且其表面机械自由,但承受两种电磁边界条件.首先推导了频散方程,然后结合数值算例分析了功能梯度层材料性能的梯度变化、厚度及电磁边界条件对相速度的影响,结果对功能梯度磁电弹材料在声波器件中的应用具有参考价值.     

Mechanical buckling of a functionally graded cylindrical shell with axial and circumferential stiffeners using the third-order shear deformation theory

This paper deals with an analytical approach of the buckling behavior of a functionally graded circular cylindrical shell under axial pressure with external axial and circumferential stiffeners. The shell properties are assumed to vary continuously through the thickness direction. Fundamental relations and equilibrium and stability equations are derived using the third-order shear deformation theory. The resulting equations are employed to obtain the closed-form solution for the critical buckling loads. A simply supported boundary condition is considered for both edges of the shell. The comparison of the results of this study with those in the literature validates the present analysis. The effects of material composition (volume fraction exponent), of the number of stiffeners and of shell geometry parameters on the characteristics of the critical buckling load are described. The analytical results are compared and validated using the finite-element method. The results show that the inhomogeneity parameter, the geometry of the shell and the number of stiffeners considerably affect the critical buckling loads.     

A greedy-model-based reinforcement learning algorithm for Beyond-5G cooperative data collection

Data collection is an essential part of Beyond-5G and Internet of Things applications. In urban area, heterogeneous access points such as Wi-Fi routers and base stations can meet the required communication coverage and bandwidth in data collection processes. However, in remote area, without communication infrastructures, it is hard to guarantee the communication quality of a large-scale data aggregation network. An existing approach is to use an unmanned aerial vehicle (UAV) to act as a mobile sink to perform data collection and increase the coverage of intelligent wireless sensing and communications. The efficiency and the reliability of such a UAV-assisted data collection system can be significantly enhanced with an intelligent cooperative strategy for the sensors deployed in the field to communicate with the UAV. Furthermore, an energy-efficient trajectory planning algorithm is crucial to address the physical limitations of the UAV in this application. In this paper, a data collection process is modeled as a Markov decision process (MDP). The paper begins with proposing two heuristic greedy algorithms, namely distance-greedy (DG) algorithm and rate-greedy (RG) algorithm, which are designed based on prior knowledge of the system and can guarantee the completion of the data collection process in a remote area without the help of fixed communication infrastructures. Based on the outcomes, a multi-agent greedy-model-based reinforcement learning (MG-RL) algorithm is proposed, which specifically designs the environmental state and the reward scheme, and introduces multiple UAVs with different parameters to explore environments in parallel to accelerate the training. In conclusion, the two proposed greedy algorithms have lower complexity of implementation while the proposed MG-RL algorithm yields practical UAVs’ flight trajectories and shortens the time for completing a data collection task.     

Crack propagation in a functionally graded plate under thermal shock

Summary Thermal cracking in a ceramic/metal functionally graded plate is discussed. When a functionally graded plate is cooled from high temperature, curved or straight crack paths are experimentally observed on the ceramic surface. One of the reasons that make the crack paths to differ are the thermal or mechanical conditions. In order to clarify the influence of these conditions on the crack path, the crack propagation is simulated using finite element method. Received 29 September 1998; accepted for publication 2 August 1999     

DYNAMIC STRESS FIELD AROUND THE MODE Ⅲ CRACK TIP IN AN ORTHOTROPIC FUNCTIONALLY GRADED MATERIAL

The problem of a Griffith crack in an unbounded orthotropic functionally graded material subjected to antipole shear impact was studied. The shear moduli in two directions of the functionally graded material were assumed to vary proportionately as definite gradient. By using integral transforms and dual integral equations, the local dynamic stress field was obtained. The results of dynamic stress intensity factor show that increasing shear moduli’s gradient of FGM or increasing the shear modulus in direction perpendicular to crack surface can restrain the magnitude of dynamic stress intensity factor.     

分次直投射模及应用

本文引进分次直投射模的概念,得到分次直投射模的一个判定定理,并利用分次直投射模刻划了分次左遗传环,分次左半遗传环,分次左半单环和分次左PP-环,